To apply an update from ADB, you will need to follow these steps:1. Connect your Android device to your computer using a USB cable.2. Open a command prompt window on your computer and navigate to the directory where the ADB tools are located. This is usually the platform-tools folder within the Android SDK installation directory.3. Type the following command to check if your device is connected and recognized by ADB:
```
adb devices
```4. If your device is listed, you can proceed to apply the update. First, reboot your device into recovery mode by typing the following command:
```
adb reboot recovery
```5. Once your device is in recovery mode, use the volume buttons to navigate to the "Apply update from ADB" option and select it using the power button.6. Next, on your computer, type the following command to apply the update:
```
adb sideload path_to_update.zip
```
Replace "path_to_update.zip" with the actual file path of the update package you want to install.7. The update will be transferred from your computer to your device and installed. This process may take some time, so be patient.8. Once the update is successfully applied, you can reboot your device by selecting the "Reboot system now" option in recovery mode.9. Your device should now be updated with the latest software version.It's important to note that applying updates from ADB requires some technical knowledge and can be risky if not done correctly. Make sure to backup your data before proceeding and follow the instructions carefully to avoid any issues.
